Call us at: 727-376-2733 Serving Customers Worldwide
Click Map to Find a Dealer

For generations, Waterman Industries of Florida, Inc. has produced quality commercial fishing equipment targeting independent fishing fleets. At Waterman Industries, we stand for unmatched craftsmanship in every product produced.

Sidewinders
Product Features:

The Waterman sidewinder hauler features a 10” stainless steel pinch shive mounted on a durable aluminum housing. 3/4 hp and 1 hp motors are available in both 1800 rpm or 3350 rpm.

The complete unit weighs approximately 68 pounds and receives its power from 12 volt or 24 volt Scott motors. The sidewinder comes with 20:1, 25:1, 30:1 40:1, 50:1 or 60:1 gear reduction units for the proper amount of torque for the job. The Sidewinder attaches firmly and securely to the boat by way of reinforced aluminum flanges to the boat's washboards. The unit measures 24” x 11” x 11”.

The pinch sheaves are mounted at 18 degrees to prevent shimming problems. The sidewinder is available in either a right-hand or left-hand design.

Ratio RPM At Hub Adjusted HP Line Speed
Small Line 
(FPM)
Line Speed
Large Line (FPM)
Dead Lift/LBS
Small Line
Dead Lift/LBS
Large Line
20:1 172.5 0.614 271 451 75 45
25:1 138 0.586 217 361 89 54
30:1 115 0.58 181 301 106 64
40:1 86.25 0.554 135 226 135 81
50:1 69 0.529 108 181 161 97
60:1 57.5 0.466 90 150 170 102

Note: Keep in mind these numbers are "no load". The amount of weight being pulled will adjust the speed of retrieval. The heavier the catch, the higher the amp draw and the slower the speed. Most models can run continuously for about 60 minutes from "cold" (at the rated load), then continue at a 50 percent duty cycle.